HSMV 2020

from Thursday, 15 October 2020 (09:00) to Friday, 16 October 2020 (23:00)
Online

        : Sessions
    /     : Talks
        : Breaks
15 Oct 2020
16 Oct 2020
AM
10:00
Opening Welcome (until 10:15) ()
10:15
CFD/EFD/Sea Trials 1 (until 11:45) ()
10:15 An Overview of Stepped Hull Performance Evaluation: Sea Trial Data vs Full Scale CFD Simulations - Dr Simone Mancini (Force Technology) Dr Luigi Vitiello (University of Naples "Federico II")   ()
10:45 INVESTIGATION OF ENVIRONMENTAL EFFECTS OF HIGH SPEED BOATS - Prof. Ahmet Dursun ALKAN (Prof.)   ()
11:15 Stern Flap Solution to Contain the Speed Performance Loss due to the Ship Weight Growth: an Application on the “De La Penne” Destroyer Class - Dr Vincenzo Basile (Ship Design Office - Italian Navy General Staff)   ()
11:45 --- Coffe break ---
09:00
Hydrofoils (until 10:30) ()
09:00 Analysis of a hydrofoil craft with a suspension system - Dr Ido Akkerman (TU Delft)   ()
09:30 Numerical investigation of hydroelastic response of a three-dimensional deformable hydrofoil - Dr Kristjan Tabri (Tallinn University of Technology) Mr Saeed Hosseinzadeh (Tallinn University of Technology)   ()
10:00 Innovative Hydrofoil Approach for Very Light Seaplane - Dr Antonio Maglione (IDS SpA - Aeronautical and Unmanned Division)   ()
10:30 --- Coffe break ---
10:45
Multi Hull Hydrodynamics (until 12:15) ()
10:45 WAVE INTERFERENCE PREDICTION OF A TRIMARAN USING FORM FACTOR - Mr Suleyman Duman (Yildiz Technical University, Department of Naval Architecture and Marine Engineering, Istanbul, Turkey)   ()
11:15 PURE YAW SIMULATIONS OF FAST DELFT CATAMARAN 372 IN DEEP WATER - Suleyman Duman (Yildiz Technical University, Department of Naval Architecture and Marine Engineering, Istanbul, Turkey)   ()
11:45 Optimization of Trimaran Design Configuration in Calm and Deep Water - Mr Renato Skejic (Senior Research Scientist/Engineer)   ()
PM
12:00
Second Generation Intact Stability Criteria (until 13:30) ()
12:00 Numerical Study on Ship Parametric Roll in Head Waves - Mr Huawei Zhou   ()
12:30 Second Generation Intact Stability Criteria fallout on naval ships limiting KG curve - Gennaro Rosano (Università degli Studi di Napoli Federico II)   ()
13:00 Surf-riding Operational Measures for Fast Semidisplacement Naval Hull Form - Barbara Rinauro   ()
13:30 --- Lunch break ---
14:00
Planing Hull Hydrodynamics 1 (until 15:30) ()
14:00 Simulating hydroelastic slamming by coupled Lagrangian-FDM and FEM - Dr Josip Basic (University of Split)   ()
14:30 Warp effects studied by a time-domain strip model and compared to model experiments - Dr Karl Garme (Associate professor)   ()
15:00 Experimental and Predictions of Pressure Distributions on the Bottom of a Prismatic Planing Hull During Wave Slamming - Carolyn Judge   ()
15:30 --- Coffe break ---
15:45
Planing Hull Hydrodynamics 2 (until 16:45) ()
15:45 The roll damping of high-speed craft in waves - Dr Matteo Bonci (MARIN)   ()
16:15 A Linear Model Analysis of the Unsteady Force Response of a Planing Hull through Forced Vertical Plane Motion Simulations - Mr Nicholas Husser (Virginia Polytechnic Institute and State University)   ()
12:15
Propulsion, Ship Machinery (until 13:45) ()
12:15 Design of a close power loop test bench for contra-rotating propellers - Dr Antonio Giallanza (University of Palermo)   ()
12:45 Advance speed-hull-Pump-Jet interactions in small ASV - Angelo Odetti (CNR-INM)   ()
13:15 Innovative use of hybrid propulsion system in fast passenger ferries over 300 passengers and 20 knots. - Valerio Ruggiero (University of Messina)   ()
13:45 --- Lunch break ---
14:30
CFD/EFD/Sea Trials 2 (until 16:00) ()
14:30 Full-scale propulsion measurements on a planing pleasure yacht in head sea - Riccardo Pigazzini (Università Degli Studi di Trieste)   ()
15:00 Numerical Modelling of a Planing Craft With a V-Shaped Spray Interceptor Arrangement in Calm Water - Mr Miklos Lakatos (Tallinn University of Technology)   ()
15:30 Design and Testing Outline for a Free Running Model of a High Speed Craft - Mirjam Furth   ()
16:00 --- Coffe break ---
16:15
Structures, loads, strength, materials (until 17:45) ()
16:15 Comparative Assessment of Rule-Based Design on the Pressures and Resulting Scantlings of High Speed Powercrafts - Ermina Begovic (Department of Industrial Engineering, University of Naples Federico II, Italy.)   ()
16:45 LIGHTWEIGHT ALUMINIUM SANDWICH STRUCTURES FOR MARINE VEHICLES - Giulia Palomba (Department of Engineering, University of Messina, Italy)   ()
17:15 Non-linear FEA of AA 5083 welded jonts for high-speed marine vehicles - Pasqualino Corigliano (University of Messina)   ()
17:45
Closing (until 18:00) ()