Name: HSMV 2020
Start: 2020-10-15T09:00:00+02:00
End: 2020-10-16T23:00:00+02:00
Location: Online

HSMV 2020

from Thursday, 15 October 2020 (09:00) to Friday, 16 October 2020 (23:00)

Monday, 12 October 2020
Tuesday, 13 October 2020
Wednesday, 14 October 2020
Thursday, 15 October 2020

10:00

10:00 - 10:15
10:15
10:15 - 11:45
Contributions

10:15 An Overview of Stepped Hull Performance Evaluation: Sea Trial Data vs Full Scale CFD Simulations - Luigi Vitiello (University of Naples "Federico II") Simone Mancini (Force Technology)

10:45 INVESTIGATION OF ENVIRONMENTAL EFFECTS OF HIGH SPEED BOATS - Ahmet Dursun ALKAN (Prof.)

11:15 Stern Flap Solution to Contain the Speed Performance Loss due to the Ship Weight Growth: an Application on the “De La Penne” Destroyer Class - Vincenzo Basile (Ship Design Office - Italian Navy General Staff)
11:45 Coffe break
Coffe break
11:45 - 12:00
12:00
12:00 - 13:30
Contributions

12:00 Numerical Study on Ship Parametric Roll in Head Waves - Huawei Zhou

12:30 Second Generation Intact Stability Criteria fallout on naval ships limiting KG curve - Gennaro Rosano (Università degli Studi di Napoli Federico II)

13:00 Surf-riding Operational Measures for Fast Semidisplacement Naval Hull Form - Barbara Rinauro
13:30 Lunch break
Lunch break
13:30 - 14:00
14:00
14:00 - 15:30
Contributions

14:00 Simulating hydroelastic slamming by coupled Lagrangian-FDM and FEM - Josip Basic (University of Split)

14:30 Warp effects studied by a time-domain strip model and compared to model experiments - Karl Garme (Associate professor)

15:00 Experimental and Predictions of Pressure Distributions on the Bottom of a Prismatic Planing Hull During Wave Slamming - Carolyn Judge
15:30 Coffe break
Coffe break
15:30 - 15:45
15:45
15:45 - 16:45
Contributions

15:45 The roll damping of high-speed craft in waves - Matteo Bonci (MARIN)

16:15 A Linear Model Analysis of the Unsteady Force Response of a Planing Hull through Forced Vertical Plane Motion Simulations - Nicholas Husser (Virginia Polytechnic Institute and State University)
Friday, 16 October 2020
09:00
09:00 - 10:30
Contributions

09:00 Analysis of a hydrofoil craft with a suspension system - Ido Akkerman (TU Delft)

09:30 Numerical investigation of hydroelastic response of a three-dimensional deformable hydrofoil - Saeed Hosseinzadeh (Tallinn University of Technology) Kristjan Tabri (Tallinn University of Technology)

10:00 Innovative Hydrofoil Approach for Very Light Seaplane - Antonio Maglione (IDS SpA - Aeronautical and Unmanned Division)
10:30 Coffe break
Coffe break
10:30 - 10:45
10:45
10:45 - 12:15
Contributions

10:45 WAVE INTERFERENCE PREDICTION OF A TRIMARAN USING FORM FACTOR - Suleyman Duman (Yildiz Technical University, Department of Naval Architecture and Marine Engineering, Istanbul, Turkey)

11:15 PURE YAW SIMULATIONS OF FAST DELFT CATAMARAN 372 IN DEEP WATER - Suleyman Duman (Yildiz Technical University, Department of Naval Architecture and Marine Engineering, Istanbul, Turkey)

11:45 Optimization of Trimaran Design Configuration in Calm and Deep Water - Renato Skejic (Senior Research Scientist/Engineer)
12:15
12:15 - 13:45
Contributions

12:15 Design of a close power loop test bench for contra-rotating propellers - Antonio Giallanza (University of Palermo)

12:45 Advance speed-hull-Pump-Jet interactions in small ASV - Angelo Odetti (CNR-INM)

13:15 Innovative use of hybrid propulsion system in fast passenger ferries over 300 passengers and 20 knots. - Valerio Ruggiero (University of Messina)
13:45 Lunch break
Lunch break
13:45 - 14:30
14:30
14:30 - 16:00
Contributions

14:30 Full-scale propulsion measurements on a planing pleasure yacht in head sea - Riccardo Pigazzini (Università Degli Studi di Trieste)

15:00 Numerical Modelling of a Planing Craft With a V-Shaped Spray Interceptor Arrangement in Calm Water - Miklos Lakatos (Tallinn University of Technology)

15:30 Design and Testing Outline for a Free Running Model of a High Speed Craft - Mirjam Furth
16:00 Coffe break
Coffe break
16:00 - 16:15
16:15
16:15 - 17:45
Contributions

16:15 Comparative Assessment of Rule-Based Design on the Pressures and Resulting Scantlings of High Speed Powercrafts - Ermina Begovic (Department of Industrial Engineering, University of Naples Federico II, Italy.)

16:45 LIGHTWEIGHT ALUMINIUM SANDWICH STRUCTURES FOR MARINE VEHICLES - Giulia Palomba (Department of Engineering, University of Messina, Italy)

17:15 Non-linear FEA of AA 5083 welded jonts for high-speed marine vehicles - Pasqualino Corigliano (University of Messina)
17:45

17:45 - 18:00

Share this page

Direct link

Social networks

Calendaring