Name: NAV 2022
Start: 2022-06-15T10:00:00+02:00
End: 2022-06-17T20:00:00+02:00
Location: No location set

Monday, 13 June 2022
Tuesday, 14 June 2022
Wednesday, 15 June 2022
11:00
11:00 - 13:00
Contributions

11:00 SKIN. The use of external surface in yacht design - Giulia Zappia (University of Genoa, Department Architecture and Design)

11:20 ARGOS: a solution to increase security and safety of ships - Franco Gottifredi (GEA Space s.r.o.)

11:40 Safety System for Ships in Harbours - Liliana Pinheiro (National Civil Engineering Laboratory)

12:00 Effectiveness of visual languages in the context of communications for safety and on-board orientation - Maria Elisabetta Ruggiero (Unige - DAD)

12:20 Experiments for the definition of communication models: the visual identity of a navigation company in relation to on-board services - maria elisabetta ruggiero (Università di Genova - Dipartimento Architettura e Design)
11:00 - 13:00
Contributions

11:00 Hydrodynamic Assessment of Double-Ended Ferry for Operation in Venice - Victor Ferrari (MARIN)

11:20 Numerical CFD Prediction of the Asymmetrical Shaft Unbalance During Ship Maneuvers - Diego Villa (Univerisity of Genova)

11:40 On the development of a ship simulation model for maneuvering tasks in waves - Maria Acanfora (University of Naples “Federico II”, Italy)

12:00 Weather Routing Model for Ship Motions Reduction and Fuel Saving - Silvia Pennino (University of Naples “Parthenope”)

12:20 Alternative assessment of passenger ship safety – Early results from the EU project FLARE - Alessandro Maccari (RINA Services SpA)
11:00 - 13:00
Contributions

11:00 Wind assisted ship propulsion feasibility study. - Massimo Figari (Università degli Studi di Genova)

11:20 A digital twin approach to the diagnostic analysis of a marine diesel engine - Luigia Mocerino (Università degli Studi di Napoli, Federico II)

11:40 Sensitivity analysis of a marine gasoline engine: from power to emissions - Luigia Mocerino (University of Naples “Parthenope")

12:00 Classifying the Innovation: The Certification of New Designs for Power Generation, Conversion and Energy Storage Focusing on the Reduction of Ships Emissions - Matteo Roiaz (Lloyd's Register)

12:20 The study of an innovative propulsion plant for a High-Speed Catamaran Ferry for decarbonisation in the marine industry - Alessandro Taylor (Naval Architectural Services Ltd.)
14:30
14:30 - 16:30
Contributions

14:50 Fully-Recyclable Epoxy Fibers Reinforced Composites (FRCs) for Maritime Field: chemical recycling and re-use routes - Lorena Saitta (Department of Civil Engineering and Architecture, University of Catania)

15:10 Study of the corrosion behaviour of welded systems for marine industry applications - Lorenzo Fedrizzi (University of Udine)

15:30 Deep Neural Network (DNN) Method to predict the displacement behavior of neutral axis for ships in vertical bending - Thomas Lindemann (University of Rostock, Chair of Ship Structures, Rostock, Germany)

15:50 Innovative and sustainable materials for naval applications through national cooperative research: the experience of the THALASSA project - Simone Panfiglio (NAVTEC)

16:10 Experimental investigation on a lightweight ship balcony overhang with bimetallic welded joints - Giulia Palomba (University of Messina - Department of Engineering)
14:30 - 16:30
Contributions

14:30 NOISE AND VIBRATION PREDICTIONS AND MEASUREMENTS - Lorenzo Kusterman (RINA Services spa)

14:50 Noise pollution: underwater noise and noise in port - Elisa Fassola (RINA Services spa)

15:10 Surfing green while saving money - Elisabetta Elisabetta PIANA (Karberg & Hennemann)

15:30 Hybrid system virtualisation for predicting performance and eliminating risks and uncertainties - Amodio Palma (WinGD)

15:50 An innovative cruise-ship onshore power supply facility in the port of marseille - Alessandro Boveri (CETENA SPA) Franco Porcellacchia (COSTA CROCIERE)
14:30 - 16:30
Contributions

14:30 A Systematik Ferry Model Serie - Marcello Costanzo (CNR INM)

14:50 SIMULATION APPLICATIONS - Luca Isgrò (CETENA SPA)

15:10 Fast estimation of the time-to-flood on simple geometries - Luca Braidotti (University of Trieste)

15:30 A methodology for the hull forms design of a passenger catamaran for the Venice Lagoon - Donato Padolecchia (University of Trieste)

15:50 The inside story of COVID-19 pandemic on The Diamond Princess as the prime mover of present and future ship design studies - Gennaro Arma (Captain at Princess Cruises. Santa Clarita, California (USA)) Angela Denise Peri (Naval Architect, PhD Student. Department of Architecture and Design (DAD), University of Genoa)
17:00
17:00 - 19:00
Contributions

17:00 On the structural response of bio-based adhesives for wooden hulls - Serena Bertagna (Università degli Studi di Trieste)

17:20 ENVIRONMENTALLY FRIENDLY COMPOSITES AND SURFACE TREATMENTS FOR METAL-TO-COMPOSITE HYBRID JOINTS FOR MARINE APPLICATION - Fabrizio Sarasini (University of Rome La Sapienza)

17:40 Life Cycle Assessment in the naval sector: between certification and new materials - Barbara Busetto (MICAD)

18:00 Investigations on Ultimate Strength for a Container Vessel under Combined Loads - Thomas Lindemann (University of Rostock, Chair of Ship Structures, Rostock, Germany)

18:20 Fracture mechanics properties of Al/Steel Structural Transition Joints for shipbuilding - Pasqualino Corigliano (University of Messina, Department of Engineering)
17:00 - 19:00
Contributions

17:00 Road to maritime sector decarbonization - Maurizio Archetti (Ecospray) Barbara Bosio (Department of Civil , Chemical and Environmental Engineering (DICCA), University of Genoa, Genoa, Italy) Xin Wang (Ecospray ) Eleonora Castiglione (Ecospray Technologies)

17:20 Proposal of a coastal ferry using last hybrid technology for green transportation in touristic areas - Gian Piero Repetti (Vulkan Italia) Matteo Zangrandi (Vulkan Italia)

17:40 Strategies for ship Decarbonisation: Technical Measure for reducing Energy Efficiency Existing Ship Index - Valentina Bortuzzo (University of Trieste)

18:00 The REShiP Project: Renewable Energy Ship Propulsion - Irene Lavagnini (Navalprogetti Srl) Chiara Dall'Armi (University of Trieste) Fabrizio Cadenaro (Lloyd's Register EMEA) Tancredi Chinese (CEnergy Srl)

18:20 Decarbonization and efficiency: the potential of digital fleet management - Schenone Michela
17:00 - 19:00
Contributions

17:00 How COVID-19 has been affecting the overall cruise ship design paradigm - Angela Denise Peri (Naval Architect, PhD Student. Department of Architecture and Design (DAD), University of Genoa)

17:20 Data driven digital twins for the maritime domain - Alexandros Troupiotis (University of the Aegean) Dimitris Zissis (University of the Aegean)

17:40 Systems Engineering and Ship Design: a synergy for getting the right design and the design right - Mattia Bottero (Università degli Studi di Genova)

18:00 A zero-emission ferry for inland waterways - Luca Maloberti (Università degli Studi di Genova) Raphael Zaccone (Università degli Studi di Genova)

18:20 Innovative solutions for the integration of medical facilities on dual-use naval ships - Nicola Norcia (Italian Navy)
Thursday, 16 June 2022
10:30
10:30 - 12:30
Contributions

10:30 Eulero, un genio matematico a bordo - Cristiano Bettini Bettini (ATENA)

10:50 Military Ultrafast Offshore Vessel - Cristiano Bettini Bettini (ATENA) Leonardo Acciarri

11:10 Submarine Rescue Capability: Special and Diving Operation – Submarine Rescue Ship (SDO – SuRS) Deployable Assets - Christian Perrone (Italian Navy)

11:30 The evolution of large pleasure vessel towards a green future - Gianmarco Vergassola (University of Genova)

11:50 A smart mockup for an innovative interior yacht design approach - Mario Ivan Zignego (Università di Genova)
10:30 - 12:30
Contributions

10:30 Naval Fleet Integrated Logistic Design optimization: the Italian Navy experience in enhancing feedback from the field. - Alessandro Peisino (Marina Militare Italiana, Centro di Supporto e Sperimentazione Navale)

10:50 Near Future Submarine: development of a combined Air Independent and Lithium Battery propulsion system (AiLiP) - Decio TRINCA (Italian Navy)

11:10 Drag based Shape Optimization of Submarines and AUVs Using CFD Analysis - Gianni Buttaro (Italian Navy General Staff - 5th Department Submarines)

11:30 New Generation Mine CounterMeasure Vessel - Domenico Capt. Guadalupi (NAVARM - Italian Navy)

11:50 BESS-Based Hybrid Propulsion: an Application to a Front Line Naval Vessel Preliminary Design - Daniele Belvisi (Marina Militare Italiana) Raphael Zaccone (Università degli Studi di Genova)
10:30 - 12:30
Contributions

10:30 DEFINITION AND DEVELOPMENT OF “MODULARITY AND OPERATIONAL FLEXIBILITY” WITH PROS AND CONS OF THE CONCEPTS ACCORDING TO NAVY EXPERIENCE - Antonio Petrucci (Italian Navy)

10:50 Italian Navy Green Fleet - case-study: a solution to increase overall efficiency of a military Ship - Antonio Bignone (Italian Navy) Gianluca Benetello (Italian Navy)

11:10 Energy saving devices: a retrofit stern flap solutions on the "De La Penne" Destroyer Class (Numerical analysis and experimental tests) - Vincenzo Basile (Italian Navy)

11:30 Shock characterization of fiberglass composite laminates: numerical and experimental comparison - Francesco Mannacio (Italian Navy, CSSN - University of Genova, DITEN)

11:50 Remote Passive Acoustic Barrier with Maritime Unmanned Systems: preliminary tests during REPMUS-21 - Lorenzo Bazzarello (CSSN - Italian Navy - University of Pisa - DII)
Friday, 17 June 2022
09:00
09:00 - 11:00
Contributions

09:00 A combined CFD-FEM approach to evaluate acoustic performances of an integrated scrubber-silencer for marine applications - Giada Kyaw Oo D'Amore (Department of Engineering and Architecture, University of Triest)

09:20 A numerical method to fit the need of a straightforward characterization of viscoelastic materials for marine applications - Giovanni Rognoni (Università di Trieste)

09:40 REGULATORY MEASURES TO TACKLE CLIMATE CHANGES - giovanna carosi (RINA Services Spa)

10:00 Assessment of on-board sound insulation in the low frequency range using an experimental laboratory methodology based on the modal approach - Mirko Bassetti (CETENA SPA) Federico Gaggero (CETENA SPA) Enrico Lembo (FINCANTIERI) Andrea Prato (INRIM) Alessandro Schiavi (INRIM) Paolo Silvestri (UNIGE) Tatiana Pais (UNIGE)

10:20 AIRBORNE SOUND PROPAGATION INDUCED BY A CRUISE SHIP THROUGH SIMULATION AND CORRELATION WITH REAL MEASUREMENTS - Mirko Bassetti (CETENA SPA) Enrico Lembo (FINCANTIERI) Andrea Iuliano (FINCANTIERI) Maurizio Morelli (OTOSPRO) Attilio Binotti (OTOSPRO)
09:00 - 11:00
Contributions

09:00 Free Surface Hydrodynamics of Submarine Masts Configurations - Giuliano Vernengo (University of Genoa)

09:20 Computational Fluid Dynamics for Submarine Design and Performance Analysis - Benedetto Piaggio (University of Genoa) Giuliano Vernengo (University of Genoa)

09:40 A Numerical Investigation of the Effect of Spatial and Temporal Resolution together with Turbulence Modelling on the Hydrodynamic Forces of a Cavitating Foil - Mariana Zammit Munro (University of Malta)

10:00 On the Application of a Vortex Lattice Method to Lifting Bodies Close to a Free Surface - Raffaele Solari (DITEN, University of Genoa)

10:20 Numerical estimation of Pre-Swirl Stator efficiency - Andro Bakica (Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb)
09:00 - 11:00
Contributions

09:00 Industry 4.0 in Ship Design, Production & Maintenance - Rodrigo Perez Fernandez (Universidad Politécnica de Madrid)

09:20 Rapid prototyping for enhanced dynamic positioning systems. - Silvia Donnarumma (University of Genoa)

09:40 Ammonia as an alternative fuel for large passenger ships: benefits and challenges - Filippo Scamardella (UNIGE - DITEN)

10:00 Technical feasibility study of an ammonia-fuelled mega-yacht powered by PEM fuel cells - Roberta Russo (University of Naples Federico II)

10:20 A Swappable Battery to Reduce Emissions of Ships. - Paolo Scialla (Lloyd's Register EMEA)
11:15
11:15 - 13:15
Contributions

11:15 A ROADMAP TOWARDS THE AUTONOMOUS SHIP: THE MARIN PROJECT - Luca Sebastiani (SEASTEMA Fincantieri NexTech) Francesco Pettinato (SEASTEMA Fincantieri NexTech)

11:35 Cyber Resilience of Automated and Autonomous Ships - Enrico Carrara (RINA Services S.p.A.)

11:55 Surface unmanned multipurpose research marine vehicle: SUNMARE project - Alec Malito (CNR-INM (Italian National Research Council – Institute for Marine Eng.)
11:15 - 13:15
Contributions

11:15 Numerical modelling of the hydrodynamic response of a dual-chamber fixed Oscillating Water Column Wave Energy Converter through the meshless DualSHPhysics method - Gael Anastas

11:35 SHIP URN: UNIGE activities in the context of LIFE-PIAQUO Project - Stefano Gaggero (Università degli studi di Genova)

11:55 Optimal conceptual design using NSGA-II algorithm for Galápagos interisland service small craft including flaps - Ruben Paredes (ESPOL Polytechnic University)

12:15 Experimental Analysis of Cavitation Erosion on Blade Root of Variable Pitch Propeller - Afaq Ahmed Abbasi (Università degli Studi di Genova)
14:15
14:15 - 15:45
Contributions

14:15 EXPERIMENTAL DETERMINATION OF THE VIBRATION PATHS ONBOARD AND CONTRIBUTE OF THE VIBRATION LEVELS OF A SOURCE TO A TARGET – APPLICATION OF THE TRANSFER PATH ANALYSIS TECHNIQUE ONBOARD A CRUISE SHIP - - Mirko Bassetti (CETENA SPA) Riccardo Tonna (CETENA SPA) Enrico Lembo (FINCANTIERI) Andrea Iuliano (FINCANTIERI) Paolo Silvestri (UNIGE) Tatiana Pais (UNIGE)

14:35 Surf-riding/broaching failure mode within IMO SGISC framework - Matteo Bonci (MARIN)

14:55 Intact stability assessment of RO-RO pax vessel in the framework of Second Generation Intact Stability criteria with a specific focus on the operational profile. - Nicola Petacco (University of Genoa)
14:15 - 15:45
Contributions

14:15 “ONE DIGIT” ESTIMATION OF NAVIGATION AREA PARAMETERS FOR A MONOHULL FAST FERRY - Oleksandr Kanifolskyi (Odessa National Maritime University) Valerio Ruggiero (University of Messina)

14:35 A DIS-based air cavity concept for planing hull - Simone Mancini (Università Giustino Fortunato)

14:55 Numerical and Physical Modeling of Ship Impacts on Fenders - Andreia Gomes (Laboratório Nacional de Engenharia Civil)