Name: NAV 2018
Start: 2018-06-20T08:30:00+02:00
End: 2018-06-22T18:30:00+02:00
Location: Trieste (Italy)

NAV 2018

from Wednesday, 20 June 2018 (08:30) to Friday, 22 June 2018 (18:30)

Monday, 18 June 2018
Tuesday, 19 June 2018
Wednesday, 20 June 2018

10:00

10:00 - 12:30
Room: Saturnia

12:30 Lunch
Lunch
12:30 - 14:00
Room: Conference Hall
14:00 Session 1
Session 1
14:00 - 16:00
Room: Oceania
Contributions

14:00 Numerical investigation of 2D Vortex Induced and Wake Induced Vibrations of two circular cylinders in tandem arrangement - Simone Martini (University of Trieste)

14:15 Towards guidelines for consistent wave propagation in CFD simulations - Pierre Crepier (MARIN)

14:30 An Investigation on The Effects of Various Flow Parameters on the Underwater Flow Noise - Sertaç Bulut (Istanbul Technical University)

14:45 Performance prediction of the DTMB 5415 model in irregular waves via URANS simulations - Cecilia Leotardi (National Research Council - Marine Technology Research Institute, CNR-INSEAN)

15:00 THE EFFECT OF THE LONG-PERIOD COMPONENTS OF ADDED RESISTANCE IN IRREGULAR WAVES - Mariko Kuroda (National Maritime Research Institute)

15:15 COMPUTATIONS OF ROLL MOTION IN WAVES USING A FULLY NONLINEAR TIME DOMAIN POTENTIAL FLOW METHOD - Francesco Coslovich (Chalmers University of Technology)
Session 1
Session 1
14:00 - 16:00
Room: Marconi
Contributions

14:00 A Shared Immersive Virtual Environment for Improving Ship Design Review - Carlo Fantoni (Department of Life Sciences, University of Trieste) Marco Jez (Arsenal s.r.l.) Marko Keber (Fincantieri Oil&Gas S.p.A.)

14:15 Engineering progress measured on 3D model data rather than drawings - Igor Juricic (HexagonPPM - Marine Business Development)

14:30 Fuel cells and shipping emissions mitigation - Rodolfo Taccani (University of Trieste)

14:45 Recent Advances on Propeller Shaft lines for the Marine Industry - ELIAS BOLETIS (WARTSILA PROPULSION)

15:00 Alternative fuels: present and future of containment technologies and impact on shipbuilding. - Fabrizio Cadenaro (Lloyd's Register EMEA)

15:15 High Efficiency Waste Heat Recovery from Dual-Fuel Marine Engines - Raphael Zaccone (Università di Genova, DITEN)
Session 1
Session 1
14:00 - 16:00
Room: Saturnia
Contributions

14:00 The EU Directive 2016/1629 and the UNECE Resolution 61 laying down technical requirements for inland navigation vessels: the CEMT actions to update and to implement them at paneuropean level - Dino Telesca (ATENA Inland Waterways Group)

14:15 PAST, PRESENT & FUTURE IN NAVAL SHIP DESIGN - RODRIGO PEREZ FERNANDEZ (Marine Business Unit Area Manager, Naval Shipbuilding. SENER)

14:30 A NEW APPROACH FOR HUMAN FACTOR INTEGRATION INTO SHIP DESIGN PROCESS - COSTANTINO BONGERMINO (University of Genova) PAOLA GUALENI (UNIVERSITY OF GENOA)

14:45 NON LINEAR AND MODULAR PLANNING - Vedran Slapnicar (Head of Chair of Ship Design and Offshore Engineering)

15:00 An innovative concept for inland waterway vessel - Carlo Nasso (University of Trieste)

15:15 Towards A New Toll Calculation Method For Transiting The Suez Canal - Bulk Carriers - Maged Abdel Naby (Alexandria University)

15:30 The Bucintoro preliminary design: static and hydrodynamic assessment - GIORGIO TRINCAS (UNIVERSITY OF TRIESTE)

15:45 Analysis of the Influence of Pressure Field on Accuracy for Onboard Stability Codes - GIORGIO TRINCAS (UNIVERSITY OF TRIESTE)
16:00 Coffee Break
Coffee Break
16:00 - 16:30
Room: Conference Hall
16:30
16:30 - 18:30
Room: Oceania
Contributions

16:30 MODULAR PLATFORMS FOR EARLY PRODUCTION / FULL FIELD APPLICATIONS - ANDREA RIMOLDI (ENI) MIRCO BUSETTO (FINCANTIERI OIL & GAS)

16:45 Heavy-lifting: coupled stability & structural analysis in a load-out operation - Stéphane Dardel (Nick Danese Applied Research Sarl)

17:00 Evaluation of extreme wave loads for slender tubular structures - Francesco Mauro (Universita' di Trieste, University of Rijeka)

17:15 Station-keeping calculations in early design stage: two possible approaches - Francesco Mauro (Universita' di Trieste, University of Rijeka)

17:30 Effect of propeller modelling on station- keeping thruster allocation strategy - Francesco Mauro (Universita' di Trieste, University of Rijeka)
16:30 - 18:30
Room: Saturnia
Contributions

16:30 Dealing with novel and emerging threats in the maritime industry: The need for an alternative Life – Cycle Risk Management Framework - Konstantinos Louzis (National Technical University of Athens, School of Naval Architecture and Marine Engineering, Laboratory for Maritime Transport, Maritime Risk Group)

16:45 Hybrid Life-Saving Appliances: a Novel Evacuation-System Concept Solution - GABRIELE SANCIN (LLOYD'S REGISTER)

17:00 SRtP 2.0 – The Evolution of the Safe Return to Port concept - ALESSANDRO BONVICINI (CETENA) ANDREA MARCHESE (CETENA)

17:15 Risk Based Designs (RBD) - Marco Cadenaro (Lloyds register) Marco Nardo (Lloyd's register)

17:30 Fuzzy Analytical Hierarchical Process to Assess Weights of Importance in an Operative Risk Assessment - Luca Braidotti (University of Trieste, University of Rijeka)

17:45 Ship survivability study using high fidelity CFD - Constantinos George Zegos (Lead Specialist)

18:00 LNG OPPORTUNITIES FOR HARBOR DEVELOPMENT - OSCAR PEROSA (NAVALPROGETTI)
16:30 - 18:30
Room: Marconi
Contributions

16:30 Assessing business cases for autonomous and unmanned ships - Ørnulf Jan Rødseth (SINTEF Ocean AS)

16:45 Launch and Recovery for Ship-Deployed Autonomous Underwater Vehicles - Karl Sammut (Flinders University)

17:00 3D Adaptive Coverage Planning for Confined Space Inspection Robots - Karl Sammut (Flinders University) Rowan Pivetta (Flinders University)

17:15 Wetlands monitoring with innovative autonomous vehicles - Angelo Odetti (CNR-ISSIA)

17:30 Fastening of the data transmission in high latency satellite networks - Hubertus Osterwind (Idea Meets Market Beteiligungsgesellschaft mbH) Robert Kratz (idea meets market Beteiligungsgesellschaft mbH)
Thursday, 21 June 2018
08:30 Session 2
Session 2
08:30 - 10:30
Room: Marconi
Contributions

08:30 Shape optimization by means of proper orthogonal decomposition and dynamic mode decomposition - Nicola Demo (SISSA)

08:45 Model order reduction by means of active subspaces and dynamic mode decomposition to parametrized hull shape into hydrodynamic design problems - Marco Tezzele (SISSA - mathLab)

09:00 Fully Automated Ship Resistance Prediction using the Naval Hydro Pack - Inno Gatin (University of Zagreb, Croatia)

09:15 A Numerical Way for a Stepped Planing Hull Design and Optimization - Simone Mancini (Eurisco Consulting Srls)

09:30 Experimental and numerical prediction of the hydrodynamic performances of a 65 ft planing hull in calm water - Riccardo Pigazzini (Department of Engineering and Architecture - University of Trieste)

09:45 ON UNDERWATER GLIDER'S STABILITY IN BALANCING MODE OF MOTION - Andrey Sukhorukov (Central Design Bureau for Marine Engineering «Rubin», Saint-Petersburg)

10:00 TIME DOMAIN ASSESSMENT OF VERTICAL MOTIONS OF PLANING HULLS - Ermina Begovic (University of Naples Federico II)
Session 2
Session 2
08:30 - 10:30
Room: Oceania
Contributions

08:30 TECHNICAL AND ECONOMIC AND ENVIRONMENTAL FEASIBILITY OF AN INNOVATIVE INTEGRATED SYSTEM OF MANAGEMENT AND TREATMENT OF WASTE ON BOARD - Alessandro Iannello (ATENA)

08:45 Economic impacts of the ballast water treaty: a case study for The Netherlands and Belgium - Edwin van Hassel (University of Antwerp)

09:00 A simulation model for hybrid-electric inland waterway passenger vessels - Vittorio Bucci (University of Trieste)

09:15 Hybrid energy- and propulsion system for vessels in timetable operation - Martin Einsiedler (Shiptec AG)

09:30 LESS: a new simulation environment for the preliminary design of cruise ship energy systems - Rodolfo Taccani (University of Trieste)

09:45 Hybrid system design and performance basing on actual vessel operational data - Lorenzo Brigati (Wartsila Italia SpA)
Session 2
Session 2
08:30 - 10:30
Room: Saturnia
Contributions

08:30 GASVESSEL - CNG sea transportation project - Cok Loris (NAVALPROGETTI SRL)

08:45 Comparison of Marine Technologies for Mediterranean Offshore Gas Export - GIORGIO TRINCAS (UNIVERSITY OF TRIESTE)

09:00 Effect of different propulsion systems on CNG ships fleet composition and economic effectiveness - Francesco Mauro (Universita' di Trieste, University of Rijeka)

09:15 Small-scale LNG port facilities, permits, risk assessment, Eastern Mediterranean, LNG bunkering - Panayiotis MITROU (Lloyd's Register)

09:30 Towards building an attained index of passenger ship fire safety - Ioanna Koromila (School of Naval Architecture and Marine Engineering, National Technical University of Athens) Konstantinos Spyrou (National Technical University of Athens)

09:45 THE APPLICATION OF GOAL BASED DESIGN FOR PASSENGER SHIP SAFETY IMPROVEMENT. - ALESSANDRO BONVICINI (CETENA) MATTEO DREOSSI (CETENA)

10:00 Ballast Allocation Technique to Minimize Fuel Consumption - Sergio Bisiani (MarineLAB d.o.o.)
09:00 New Developments and Technologies for Shipbuilding and Maritime Industries – Session 1
New Developments and Technologies for Shipbuilding and Maritime Industries – Session 1
09:00 - 13:00
Room: Vulcania 2

10:30 Coffee Break
Coffee Break
10:30 - 11:00
Room: Conference Hall
11:00 Session 3
Session 3
11:00 - 13:00
Room: Saturnia
Contributions

11:00 Comparative test in design of hydrofoils for a new generation of ships - Valerio Ruggiero (University of Messina)

11:15 Experimental investigation of blade and propeller loads during straight ahead sailing - Fabrizio Ortolani (CNR-INSEAN)

11:30 Extensive cavitation tunnel acoustic characterization of controllable pitch propellers for the development of a machine learning tool - Fabiana Miglianti (DITEN - University of Genoa - Genova - Italy)

11:45 Experimental study of sloshing in rectangular tank under baffles and hydrophobic effects - Fatih Cuneyd Korkmaz (Yildiz Technical University)

12:00 Theoretical and experimental investigations of appendages and heeling angle influences on the hydrodynamic resistance of a sailing yacht - Razvan Gabriel Plingu ("Dunarea de Jos" University of Galati, Romania)

12:15 System for speed/power trials measurement and analysis in accordance with international recommended procedure - paolo becchi (CETENA S.p.A.)

12:30 Gain in Fuel Consumption with Frictional Resistance Reduction by Air-Bubbling Technique - Giovanni Alberto Di Mare (Università degli Studi di Genova)
Session 3
Session 3
11:00 - 13:00
Room: Oceania
Contributions

11:00 POSSIBILITY OF PLACING A RETRACTABLE SAIL SYSTEM FOR AN OIL TANKER TO OPTIMIZE ITS EFFICIENCY - Catalin Faitar (Maritime University of Constanta)

11:15 U-SWATH, the innovative CNR research UMV - Angelo Odetti (CNR-ISSIA)

11:30 Comparative Study of Hydrodynamic Performance for Site-Specific Optimal Designs of Catamaran and SWATH - Lixin Xu (China Merchants Offshore Technology Research Center)

11:45 A new escort tug family designed to anticipate new safety requirements and operational needs - Luca Martinelli (Rosetti Marino SpA)

12:00 Vertical motions assessment of an Offshore Supply Vessel in concept design stage - Antonino Dell'Acqua (Università di Trieste)

12:15 Systematic analysys of geometrical characteristics of hulls for displacement yacht. - Valerio Ruggiero (University of Messina)

12:30 Developments of new patented ice breaking devices for ice going vessels. - gianpiero lavini (Fincantieri S.P.A)
11:00 - 13:00
Room: Marconi
Contributions

11:00 An Alternative Approach for Assessment of the Weather Factor in EEDI Formulation Using Statistical Ranking Theory - Rumen Kishev (Bulgarian Ship Hydrodynamics Centre)

11:15 Monitoring systems at the service of ship’s energy efficiency: measurements campaign and analysis of the actual electrical absorptions on board - Federica Piastra (Cetena S.p.A.)

11:30 Implementation of Ship Energy Efficiency requirements in offshore shipping industry - Blagovest Belev (Author)

11:45 Nonlinear computations of heave motions for a generic Wave Energy Converter - Carl-Erik Janson (Chalmers University of technology)

12:00 Application of a Passive Control Technique to the ISWEC: Experimental Tests on a 1:8 HIL Test Rig - Mauro Bonfanti (Politecnico di Torino)

12:15 Experimental investigation of the hydrodynamic performance of the ISWEC 1:20 scaled device - Sergej Antonello Sirigu (Politecnico di Torino)

12:30 PeWEC: preliminary design of full-scale plant for the for the Mediterranean Sea - Nicola Pozzi (Politecnico di Torino)
13:00 Lunch
Lunch
13:00 - 14:30
Room: Conference Hall

14:00 NAVIM GROUP: From Idea through Design to Post Delivery Service
NAVIM GROUP: From Idea through Design to Post Delivery Service
14:00 - 18:00
Room: Marconi

SMALL SCALE LNG: Fuel for a Green Future of the Mediterranean Economy
SMALL SCALE LNG: Fuel for a Green Future of the Mediterranean Economy
14:00 - 18:00
Room: Oceania

The Role of Research and Technological Development in the Mega-Yacht Sector
The Role of Research and Technological Development in the Mega-Yacht Sector
14:00 - 18:00
Room: Vulcania 2

14:30

14:30 - 19:00
Friday, 22 June 2018
09:00
09:00 - 10:45
Room: Oceania
Contributions

09:00 Airborne noise prediction of a ro/ro pax ferry in the port of Naples - Tommaso Coppola (University of Naples)

09:15 Comfort class assessment: acquisition procedures and harmonization for effective passenger comfort - Luigi Bregant (University of Trieste)

09:30 ENVIRONMENTAL MONITORING HELPS INCREASING CONFORT IN A SHIP CABIN - Erina Ferro (National Research Council of Italy)

09:45 Ontologies' definition for modelling the cabin comfort on cruise ships - Massimiliano Nolich (DIA - University of Trieste)

10:00 Cruise cabin as a home: smart approaches to improve cabin comfort - Massimiliano Nolich (DIA - University of Trieste)

10:15 The irradiated noise limits of the Rules are very different : how it is possible for cruise shipbuilders to deal with very different technical approach ? - Francesco De Lorenzo (Fincantieri SpA)
09:00 - 10:45
Room: Saturnia
Contributions

09:00 ON THE DECK STRUCTURAL LAYOUT OF MEGAYACHT - Dario Boote (University of Genoa) Gianmarco Vergassola (University of Genova)

09:15 LOCAL STRAIN APPROACHES FOR LCF LIFE PREDICTION OF SHIP WELDED JOINTS - Pasqualino Corigliano (Department of Engineering, University of Messina)

09:30 Analytical formulation of plating ultimate strength with pitting corrosion wastage - Vincenzo Piscopo (The University of Naples "Parthenope")

09:45 STRUCTURAL ANALYSIS OF EXPLOSIVE WELDED JOINTS FOR SHIP STRUCTURES - Pasqualino Corigliano (Department of Engineering, University of Messina)

10:00 Internal forces and moments on hull girder due to parametric roll development - TOMMASO COPPOLA (University of Naples)

10:15 Interaction between Industry and Class Societies in Cruise Ships Structural Design: A Positive Fincantieri Experience - Matteo Sidari (Fincantieri S.p.A.) Mauro Sicchiero (Fincantieri S.p.A.) Vincenzo Liguori (Fincantieri S.p.A.)
09:00 - 10:45
Room: Marconi
Contributions

09:00 “Climate changes and maritime transportation: a state of the art” - Enrico Rizzuto (University of Naples)

09:15 Optimal navigation with ocean currents: the VISIR ship routing model - Gianandrea Mannarini (CMCC)

09:30 Kotor Bay area hydrodynamics and pollutant dispersion simulations: a tool for contingency plans - Federico Roman (iefluids s.r.l.)

09:45 Preliminary assessment of route optimisation for fuel minimisation and safety of navigation by the use of cooperatively collected data at sea - Andrea Orlandi (Researcher at Consorzio LaMMA)

10:00 Air quality simulations and forecasting of along-route ship emissions in realistic meteo-marine scenarios - Andrea Orlandi (Consorzio LaMMA, Florence,Italy)

10:15 Numerical simulation of hot smoke plumes from funnels - Federico Roman (iefluids s.r.l.)
New Developments and Technologies for Shipbuilding and Maritime Industries – Session 2
New Developments and Technologies for Shipbuilding and Maritime Industries – Session 2
09:00 - 13:00
Room: Vulcania 2

10:45 Coffee Break
Coffee Break
10:45 - 11:15
Room: Conference Hall
11:15
11:15 - 13:00
Room: Marconi
Contributions

11:15 A case for innovation in environmental protection, electric systems and energy design efficiency for yachts - Giorgio BARBINI (ABS)

11:30 Innovative Energy Systems: Motivations, Challenges and Possible Solutions in the Cruise Ship Arena - ALESSANDRO BOVERI (UNIGE - DITEN)

11:45 Distributed Energy Resources On-Board Cruise Ships: Integration into the Ship Design Process - GIORDANO FLORE (UNIGE - DITEN)

12:00 Integrated Ship Design and CSI Modeling: a New Methodology for Comparing Onboard Electrical Distributions in the Early Stage Design - Daniele Bosich (University of Trieste)

12:15 Shore-to-ship power supply integrating conventional and distributed generators along with storage - Giordano Torri (Fincantieri Si spa)

12:30 A mixed AC/DC low voltage electrical distribution architecture for increasing the payload on ships - Giuseppe La Tona (Consiglio Nazionale delle Ricerche)
11:15 - 13:00
Room: Oceania
Contributions

11:15 The Green Fleet Project – Energy Saving Measures - Massimiliano Leonardi (Marina Militare Italiana)

11:30 Italian Navy future fleet - Analysis of on board electrical systems and cold ironing - Michele Cataneo (Marina Militare Italiana)

11:45 At-sea NATO operational experimentation with interoperable underwater assets using different robotic middlewares - Vincenzo Manzari (Italian Navy - Univ. of Pisa)

12:00 The Cyber Risk and its management in the Marine Industry - Cassi Elisa (Lloyd's Register EMEA) Paolo Scialla (Lloyd's Register EMEA)

12:15 Naval automation cyber defence guidelines - Davide Cardellicchio (Marina Militare Italiana)

12:30 Definition and development of the modularity features for the Italian Navy Multirole Patrol Vessel Stern Mission Bay - Francesco Greco (Marina Militare Italiana) Simone Serpagli (Fincantieri S.p.A.)
Structures and Materials
Structures and Materials
11:15 - 13:05
Room: Saturnia
Contributions

11:15 Surface treatments for ship hulls – present situation and trends - Marina Delucchi (University of Genova, DICCA)

11:30 An innovative thermal and acoustic insulation foam for naval fire doors: characterization and study with FEM analysis - Giada Kyaw Oo D'Amore (Engineering and Architecture Department, University of Trieste)

11:45 Innovative material design for marine engine non-structural components - Serena Bertagna (University of Trieste)

12:00 FEM-aided structural design of a natural fiber composite made skiff - Claudio Moscoloni (Politecnico di Torino) Marco Fontana (Politecnico di Torino)

12:15 The strip planking: an eco-friendly solution for the end-of-life of ships - Alberto Marinò (University of Trieste)

12:30 PLM implementation: case study of a success - Nick Danese (Nick Danese Applied Research)

12:45 Weight reduction with Textile conductive and electromagnetic shielding solutions - Ivano Soliani (SOLIANI EMC SRL)
13:00 Lunch
Lunch
13:00 - 14:30
Room: Conference Hall

14:00 Cyber Security in the Marine Industry - How to Identify, Protect, Detect, Respond and Recover in the Marine Business Activities
Cyber Security in the Marine Industry - How to Identify, Protect, Detect, Respond and Recover in the Marine Business Activities
14:00 - 18:00
Room: Oceania

NUMECA: CFD Simulation in Naval Architecture
NUMECA: CFD Simulation in Naval Architecture
14:00 - 16:00
Room: Vulcania 2
14:30 Hydrodynamics
Hydrodynamics
14:30 - 16:30
Room: Marconi
Contributions

14:30 The use of modern computational tools in the design process of unconventional propellers for performance prediction and full-scale extrapolation - Juan González-Adalid (SISTEMAR)

14:45 Fluid dynamics optimization of a shaft-less rim-driven thruster - Daniele Bruno (MICAD s.r.l.) Daniele Malgieri (MICAD s.r.l.)

15:00 Hydrodynamic noise from a propeller in open sea condition - Marta Cianferra (University of Trieste)

15:15 Numerical Predictions of a Model Scale Propeller in Uniform and Oblique Flow - Mitja Morgut (Università degli Studi di Trieste)

15:30 EVALUATION OF PROPELER INDUCED VIBRATIONS - Liviu Crudu (“Dunarea de Jos” University of Galati, Faculty of Naval Architecture and NASDIS Consulting, Galati) Oana Marcu (“Dunarea de Jos” University of Galati, Faculty of Naval Architecture)

15:45 CFD Automated Self Propulsion Test - Gianluca Gustin (FINCANTIERI)

16:00 DIFFUSER DESIGN WITH VISCOUS FLOW COMPUTATIONS FOR A LARGE WATER TUNNEL - Cagatay Sabri Koksal (Istanbul Technical University)
14:30 - 16:30
Room: Saturnia
Contributions

14:30 Interior Yacht Design: evolution and new scenarios - Mariateresa Campolongo (Università degli Studi di Genova)

14:45 Interior design of motor yacht, evolution of style and typology - Enrico Carassale (UNIGE DAD)

15:00 Inclusive Yacht Design - Paolo Ferrari (University of Trieste)

15:15 An Italian Way for Yacht Coding? - Leonida Giunta (Ca' Foscari University of Venice)