Name: NAV 2018
Start: 2018-06-20T08:30:00+02:00
End: 2018-06-22T18:30:00+02:00
Location: Trieste (Italy)

NAV 2018

from Wednesday, 20 June 2018 (08:30) to Friday, 22 June 2018 (18:30)
Trieste (Italy)

: Sessions

: Talks

: Breaks

20 Jun 2018

21 Jun 2018

22 Jun 2018

10:00	Opening Ceremony (until 12:30) (Saturnia)
10:00	--- Welcome Speech ---
10:15	--- Authority Speeches ---
11:30	--- Plenary Session ---

08:30	Hydrodynamics (until 10:30) (Marconi)
08:30	Shape optimization by means of proper orthogonal decomposition and dynamic mode decomposition - Mr Nicola Demo (SISSA) (Marconi)
08:45	Model order reduction by means of active subspaces and dynamic mode decomposition to parametrized hull shape into hydrodynamic design problems - Marco Tezzele (SISSA - mathLab) (Marconi)
09:00	Fully Automated Ship Resistance Prediction using the Naval Hydro Pack - Mr Inno Gatin (University of Zagreb, Croatia) (Marconi)
09:15	A Numerical Way for a Stepped Planing Hull Design and Optimization - Dr Simone Mancini (Eurisco Consulting Srls) (Marconi)
09:30	Experimental and numerical prediction of the hydrodynamic performances of a 65 ft planing hull in calm water - Mr Riccardo Pigazzini (Department of Engineering and Architecture - University of Trieste) (Marconi)
09:45	ON UNDERWATER GLIDER'S STABILITY IN BALANCING MODE OF MOTION - Dr Andrey Sukhorukov (Central Design Bureau for Marine Engineering «Rubin», Saint-Petersburg) (Marconi)
10:00	TIME DOMAIN ASSESSMENT OF VERTICAL MOTIONS OF PLANING HULLS - Prof. Ermina Begovic (University of Naples Federico II) (Marconi)
08:30	Machinery and Systems Design (until 10:30) (Oceania)
08:30	TECHNICAL AND ECONOMIC AND ENVIRONMENTAL FEASIBILITY OF AN INNOVATIVE INTEGRATED SYSTEM OF MANAGEMENT AND TREATMENT OF WASTE ON BOARD - Dr Alessandro Iannello (ATENA) (Oceania)
08:45	Economic impacts of the ballast water treaty: a case study for The Netherlands and Belgium - Prof. Edwin van Hassel (University of Antwerp) (Oceania)
09:00	A simulation model for hybrid-electric inland waterway passenger vessels - Prof. Vittorio Bucci (University of Trieste) (Oceania)
09:15	Hybrid energy- and propulsion system for vessels in timetable operation - Mr Martin Einsiedler (Shiptec AG) (Oceania)
09:30	LESS: a new simulation environment for the preliminary design of cruise ship energy systems - Dr Rodolfo Taccani (University of Trieste) (Oceania)
09:45	Hybrid system design and performance basing on actual vessel operational data - Mr Lorenzo Brigati (Wartsila Italia SpA) (Oceania)
08:30	Ship Design (until 10:30) (Saturnia)
08:30	GASVESSEL - CNG sea transportation project - Mr Cok Loris (NAVALPROGETTI SRL) (Saturnia)
08:45	Comparison of Marine Technologies for Mediterranean Offshore Gas Export - Prof. GIORGIO TRINCAS (UNIVERSITY OF TRIESTE) (Saturnia)
09:00	Effect of different propulsion systems on CNG ships fleet composition and economic effectiveness - Francesco Mauro (Universita' di Trieste, University of Rijeka) (Saturnia)
09:15	Small-scale LNG port facilities, permits, risk assessment, Eastern Mediterranean, LNG bunkering - Mr Panayiotis MITROU (Lloyd's Register) (Saturnia)
09:30	Towards building an attained index of passenger ship fire safety - Ms Ioanna Koromila (School of Naval Architecture and Marine Engineering, National Technical University of Athens) Prof. Konstantinos Spyrou (National Technical University of Athens) (Saturnia)
09:45	THE APPLICATION OF GOAL BASED DESIGN FOR PASSENGER SHIP SAFETY IMPROVEMENT. - Mr ALESSANDRO BONVICINI (CETENA) Mr MATTEO DREOSSI (CETENA) (Saturnia)
10:00	Ballast Allocation Technique to Minimize Fuel Consumption - Mr Sergio Bisiani (MarineLAB d.o.o.) (Saturnia)
09:00	Workshop (until 13:00) (Vulcania 2)
10:30	--- Coffee Break ---
11:00	Hydrodynamics (until 13:00) (Saturnia)
11:00	Comparative test in design of hydrofoils for a new generation of ships - Prof. Valerio Ruggiero (University of Messina) (Saturnia)
11:15	Experimental investigation of blade and propeller loads during straight ahead sailing - Dr Fabrizio Ortolani (CNR-INSEAN) (Saturnia)
11:30	Extensive cavitation tunnel acoustic characterization of controllable pitch propellers for the development of a machine learning tool - Dr Fabiana Miglianti (DITEN - University of Genoa - Genova - Italy) (Saturnia)
11:45	Experimental study of sloshing in rectangular tank under baffles and hydrophobic effects - Mr Fatih Cuneyd Korkmaz (Yildiz Technical University) (Saturnia)
12:00	Theoretical and experimental investigations of appendages and heeling angle influences on the hydrodynamic resistance of a sailing yacht - Mr Razvan Gabriel Plingu ("Dunarea de Jos" University of Galati, Romania) (Saturnia)
12:15	System for speed/power trials measurement and analysis in accordance with international recommended procedure - Mr paolo becchi (CETENA S.p.A.) (Saturnia)
12:30	Gain in Fuel Consumption with Frictional Resistance Reduction by Air-Bubbling Technique - Mr Giovanni Alberto Di Mare (Università degli Studi di Genova) (Saturnia)
11:00	Ship Design (until 13:00) (Oceania)
11:00	POSSIBILITY OF PLACING A RETRACTABLE SAIL SYSTEM FOR AN OIL TANKER TO OPTIMIZE ITS EFFICIENCY - Mr Catalin Faitar (Maritime University of Constanta) (Oceania)
11:15	U-SWATH, the innovative CNR research UMV - Mr Angelo Odetti (CNR-ISSIA) (Oceania)
11:30	Comparative Study of Hydrodynamic Performance for Site-Specific Optimal Designs of Catamaran and SWATH - Dr Lixin Xu (China Merchants Offshore Technology Research Center) (Oceania)
11:45	A new escort tug family designed to anticipate new safety requirements and operational needs - Luca Martinelli (Rosetti Marino SpA) (Oceania)
12:00	Vertical motions assessment of an Offshore Supply Vessel in concept design stage - Mr Antonino Dell'Acqua (Università di Trieste) (Oceania)
12:15	Systematic analysys of geometrical characteristics of hulls for displacement yacht. - Prof. Valerio Ruggiero (University of Messina) (Oceania)
12:30	Developments of new patented ice breaking devices for ice going vessels. - Mr gianpiero lavini (Fincantieri S.P.A) (Oceania)
11:00	Ship Efficiency and Renewable Energy (until 13:00) (Marconi)
11:00	An Alternative Approach for Assessment of the Weather Factor in EEDI Formulation Using Statistical Ranking Theory - Prof. Rumen Kishev (Bulgarian Ship Hydrodynamics Centre) (Marconi)
11:15	Monitoring systems at the service of ship’s energy efficiency: measurements campaign and analysis of the actual electrical absorptions on board - Federica Piastra (Cetena S.p.A.) (Marconi)
11:30	Implementation of Ship Energy Efficiency requirements in offshore shipping industry - Prof. Blagovest Belev (Author) (Marconi)
11:45	Nonlinear computations of heave motions for a generic Wave Energy Converter - Prof. Carl-Erik Janson (Chalmers University of technology) (Marconi)
12:00	Application of a Passive Control Technique to the ISWEC: Experimental Tests on a 1:8 HIL Test Rig - Dr Mauro Bonfanti (Politecnico di Torino) (Marconi)
12:15	Experimental investigation of the hydrodynamic performance of the ISWEC 1:20 scaled device - Mr Sergej Antonello Sirigu (Politecnico di Torino) (Marconi)
12:30	PeWEC: preliminary design of full-scale plant for the for the Mediterranean Sea - Mr Nicola Pozzi (Politecnico di Torino) (Marconi)

09:00	Comfort on Board (until 10:45) (Oceania)
09:00	Airborne noise prediction of a ro/ro pax ferry in the port of Naples - Prof. Tommaso Coppola (University of Naples) (Oceania)
09:15	Comfort class assessment: acquisition procedures and harmonization for effective passenger comfort - Prof. Luigi Bregant (University of Trieste) (Oceania)
09:30	ENVIRONMENTAL MONITORING HELPS INCREASING CONFORT IN A SHIP CABIN - Dr Erina Ferro (National Research Council of Italy) (Oceania)
09:45	Ontologies' definition for modelling the cabin comfort on cruise ships - Dr Massimiliano Nolich (DIA - University of Trieste) (Oceania)
10:00	Cruise cabin as a home: smart approaches to improve cabin comfort - Dr Massimiliano Nolich (DIA - University of Trieste) (Oceania)
10:15	The irradiated noise limits of the Rules are very different : how it is possible for cruise shipbuilders to deal with very different technical approach ? - Mr Francesco De Lorenzo (Fincantieri SpA) (Oceania)
09:00	Structures and Materials (until 10:45) (Saturnia)
09:00	ON THE DECK STRUCTURAL LAYOUT OF MEGAYACHT - Mr Gianmarco Vergassola (University of Genova) Prof. Dario Boote (University of Genoa) (Saturnia)
09:15	LOCAL STRAIN APPROACHES FOR LCF LIFE PREDICTION OF SHIP WELDED JOINTS - Dr Pasqualino Corigliano (Department of Engineering, University of Messina) (Saturnia)
09:30	Analytical formulation of plating ultimate strength with pitting corrosion wastage - Dr Vincenzo Piscopo (The University of Naples "Parthenope") (Saturnia)
09:45	STRUCTURAL ANALYSIS OF EXPLOSIVE WELDED JOINTS FOR SHIP STRUCTURES - Dr Pasqualino Corigliano (Department of Engineering, University of Messina) (Saturnia)
10:00	Internal forces and moments on hull girder due to parametric roll development - Prof. TOMMASO COPPOLA (University of Naples) (Saturnia)
10:15	Interaction between Industry and Class Societies in Cruise Ships Structural Design: A Positive Fincantieri Experience - Mr Mauro Sicchiero (Fincantieri S.p.A.) Mr Matteo Sidari (Fincantieri S.p.A.) Mr Vincenzo Liguori (Fincantieri S.p.A.) (Saturnia)
09:00	Weather Routing and Environment Modeling (until 10:45) (Marconi)
09:00	“Climate changes and maritime transportation: a state of the art” - Prof. Enrico Rizzuto (University of Naples) (Marconi)
09:15	Optimal navigation with ocean currents: the VISIR ship routing model - Dr Gianandrea Mannarini (CMCC) (Marconi)
09:30	Kotor Bay area hydrodynamics and pollutant dispersion simulations: a tool for contingency plans - Dr Federico Roman (iefluids s.r.l.) (Marconi)
09:45	Preliminary assessment of route optimisation for fuel minimisation and safety of navigation by the use of cooperatively collected data at sea - Dr Andrea Orlandi (Researcher at Consorzio LaMMA) (Marconi)
10:00	Air quality simulations and forecasting of along-route ship emissions in realistic meteo-marine scenarios - Dr Andrea Orlandi (Consorzio LaMMA, Florence,Italy) (Marconi)
10:15	Numerical simulation of hot smoke plumes from funnels - Dr Federico Roman (iefluids s.r.l.) (Marconi)
09:00	Workshop (until 13:00) (Vulcania 2)
10:45	--- Coffee Break ---
11:15	Electrical Systems (until 13:00) (Marconi)
11:15	A case for innovation in environmental protection, electric systems and energy design efficiency for yachts - Mr Giorgio BARBINI (ABS) (Marconi)
11:30	Innovative Energy Systems: Motivations, Challenges and Possible Solutions in the Cruise Ship Arena - Dr ALESSANDRO BOVERI (UNIGE - DITEN) (Marconi)
11:45	Distributed Energy Resources On-Board Cruise Ships: Integration into the Ship Design Process - Mr GIORDANO FLORE (UNIGE - DITEN) (Marconi)
12:00	Integrated Ship Design and CSI Modeling: a New Methodology for Comparing Onboard Electrical Distributions in the Early Stage Design - Dr Daniele Bosich (University of Trieste) (Marconi)
12:15	Shore-to-ship power supply integrating conventional and distributed generators along with storage - Mr Giordano Torri (Fincantieri Si spa) (Marconi)
12:30	A mixed AC/DC low voltage electrical distribution architecture for increasing the payload on ships - Dr Giuseppe La Tona (Consiglio Nazionale delle Ricerche) (Marconi)
11:15	Navy and Cyber Security (until 13:00) (Oceania)
11:15	The Green Fleet Project – Energy Saving Measures - Mr Massimiliano Leonardi (Marina Militare Italiana) (Oceania)
11:30	Italian Navy future fleet - Analysis of on board electrical systems and cold ironing - Mr Michele Cataneo (Marina Militare Italiana) (Oceania)
11:45	At-sea NATO operational experimentation with interoperable underwater assets using different robotic middlewares - Mr Vincenzo Manzari (Italian Navy - Univ. of Pisa) (Oceania)
12:00	The Cyber Risk and its management in the Marine Industry - Mr Paolo Scialla (Lloyd's Register EMEA) Ms Cassi Elisa (Lloyd's Register EMEA) (Oceania)
12:15	Naval automation cyber defence guidelines - Mr Davide Cardellicchio (Marina Militare Italiana) (Oceania)
12:30	Definition and development of the modularity features for the Italian Navy Multirole Patrol Vessel Stern Mission Bay - Mr Francesco Greco (Marina Militare Italiana) Mr Simone Serpagli (Fincantieri S.p.A.) (Oceania)
11:15	Structures and Materials (until 13:05) (Saturnia)
11:15	Surface treatments for ship hulls – present situation and trends - Dr Marina Delucchi (University of Genova, DICCA) (Saturnia)
11:30	An innovative thermal and acoustic insulation foam for naval fire doors: characterization and study with FEM analysis - Mrs Giada Kyaw Oo D'Amore (Engineering and Architecture Department, University of Trieste) (Saturnia)
11:45	Innovative material design for marine engine non-structural components - Mrs Serena Bertagna (University of Trieste) (Saturnia)
12:00	FEM-aided structural design of a natural fiber composite made skiff - Mr Claudio Moscoloni (Politecnico di Torino) Mr Marco Fontana (Politecnico di Torino) (Saturnia)
12:15	The strip planking: an eco-friendly solution for the end-of-life of ships - Prof. Alberto Marinò (University of Trieste) (Saturnia)
12:30	PLM implementation: case study of a success - Mr Nick Danese (Nick Danese Applied Research) (Saturnia)
12:45	Weight reduction with Textile conductive and electromagnetic shielding solutions - Dr Ivano Soliani (SOLIANI EMC SRL) (Saturnia)

12:30	--- Lunch ---
14:00	Hydrodynamics (until 16:00) (Oceania)
14:00	Numerical investigation of 2D Vortex Induced and Wake Induced Vibrations of two circular cylinders in tandem arrangement - Mr Simone Martini (University of Trieste) (Oceania)
14:15	Towards guidelines for consistent wave propagation in CFD simulations - Mr Pierre Crepier (MARIN) (Oceania)
14:30	An Investigation on The Effects of Various Flow Parameters on the Underwater Flow Noise - Mr Sertaç Bulut (Istanbul Technical University) (Oceania)
14:45	Performance prediction of the DTMB 5415 model in irregular waves via URANS simulations - Dr Cecilia Leotardi (National Research Council - Marine Technology Research Institute, CNR-INSEAN) (Oceania)
15:00	THE EFFECT OF THE LONG-PERIOD COMPONENTS OF ADDED RESISTANCE IN IRREGULAR WAVES - Ms Mariko Kuroda (National Maritime Research Institute) (Oceania)
15:15	COMPUTATIONS OF ROLL MOTION IN WAVES USING A FULLY NONLINEAR TIME DOMAIN POTENTIAL FLOW METHOD - Francesco Coslovich (Chalmers University of Technology) (Oceania)
14:00	Machinery and Systems Design (until 16:00) (Marconi)
14:00	A Shared Immersive Virtual Environment for Improving Ship Design Review - Prof. Carlo Fantoni (Department of Life Sciences, University of Trieste) Mr Marco Jez (Arsenal s.r.l.) Dr Marko Keber (Fincantieri Oil&Gas S.p.A.) (Marconi)
14:15	Engineering progress measured on 3D model data rather than drawings - Mr Igor Juricic (HexagonPPM - Marine Business Development) (Marconi)
14:30	Fuel cells and shipping emissions mitigation - Dr Rodolfo Taccani (University of Trieste) (Marconi)
14:45	Recent Advances on Propeller Shaft lines for the Marine Industry - Dr ELIAS BOLETIS (WARTSILA PROPULSION) (Marconi)
15:00	Alternative fuels: present and future of containment technologies and impact on shipbuilding. - Mr Fabrizio Cadenaro (Lloyd's Register EMEA) (Marconi)
15:15	High Efficiency Waste Heat Recovery from Dual-Fuel Marine Engines - Dr Raphael Zaccone (Università di Genova, DITEN) (Marconi)
14:00	Ship Design (until 16:00) (Saturnia)
14:00	The EU Directive 2016/1629 and the UNECE Resolution 61 laying down technical requirements for inland navigation vessels: the CEMT actions to update and to implement them at paneuropean level - Mr Dino Telesca (ATENA Inland Waterways Group) (Saturnia)
14:15	PAST, PRESENT & FUTURE IN NAVAL SHIP DESIGN - Dr RODRIGO PEREZ FERNANDEZ (Marine Business Unit Area Manager, Naval Shipbuilding. SENER) (Saturnia)
14:30	A NEW APPROACH FOR HUMAN FACTOR INTEGRATION INTO SHIP DESIGN PROCESS - Mr COSTANTINO BONGERMINO (University of Genova) Prof. PAOLA GUALENI (UNIVERSITY OF GENOA) (Saturnia)
14:45	NON LINEAR AND MODULAR PLANNING - Prof. Vedran Slapnicar (Head of Chair of Ship Design and Offshore Engineering) (Saturnia)
15:00	An innovative concept for inland waterway vessel - Mr Carlo Nasso (University of Trieste) (Saturnia)
15:15	Towards A New Toll Calculation Method For Transiting The Suez Canal - Bulk Carriers - Dr Maged Abdel Naby (Alexandria University) (Saturnia)
15:30	The Bucintoro preliminary design: static and hydrodynamic assessment - Prof. GIORGIO TRINCAS (UNIVERSITY OF TRIESTE) (Saturnia)
15:45	Analysis of the Influence of Pressure Field on Accuracy for Onboard Stability Codes - Prof. GIORGIO TRINCAS (UNIVERSITY OF TRIESTE) (Saturnia)
16:00	--- Coffee Break ---
16:30	Offshore (until 18:30) (Oceania)
16:30	MODULAR PLATFORMS FOR EARLY PRODUCTION / FULL FIELD APPLICATIONS - Mr MIRCO BUSETTO (FINCANTIERI OIL & GAS) ANDREA RIMOLDI (ENI) (Oceania) Paper
16:45	Heavy-lifting: coupled stability & structural analysis in a load-out operation - Mr Stéphane Dardel (Nick Danese Applied Research Sarl) (Oceania) Slides
17:00	Evaluation of extreme wave loads for slender tubular structures - Francesco Mauro (Universita' di Trieste, University of Rijeka) (Oceania)
17:15	Station-keeping calculations in early design stage: two possible approaches - Francesco Mauro (Universita' di Trieste, University of Rijeka) (Oceania)
17:30	Effect of propeller modelling on station- keeping thruster allocation strategy - Francesco Mauro (Universita' di Trieste, University of Rijeka) (Oceania)
16:30	Safety and Security (until 18:30) (Saturnia)
16:30	Dealing with novel and emerging threats in the maritime industry: The need for an alternative Life – Cycle Risk Management Framework - Mr Konstantinos Louzis (National Technical University of Athens, School of Naval Architecture and Marine Engineering, Laboratory for Maritime Transport, Maritime Risk Group) (Saturnia)
16:45	Hybrid Life-Saving Appliances: a Novel Evacuation-System Concept Solution - Mr GABRIELE SANCIN (LLOYD'S REGISTER) (Saturnia)
17:00	SRtP 2.0 – The Evolution of the Safe Return to Port concept - Mr ALESSANDRO BONVICINI (CETENA) Mr ANDREA MARCHESE (CETENA) (Saturnia)
17:15	Risk Based Designs (RBD) - Mr Marco Nardo (Lloyd's register) Mr Marco Cadenaro (Lloyds register) (Saturnia)
17:30	Fuzzy Analytical Hierarchical Process to Assess Weights of Importance in an Operative Risk Assessment - Mr Luca Braidotti (University of Trieste, University of Rijeka) (Saturnia)
17:45	Ship survivability study using high fidelity CFD - Mr Constantinos George Zegos (Lead Specialist) (Saturnia)
18:00	LNG OPPORTUNITIES FOR HARBOR DEVELOPMENT - Mr OSCAR PEROSA (NAVALPROGETTI) (Saturnia)
16:30	Ship Digitalization and Unmanned Vehicles (until 18:30) (Marconi)
16:30	Assessing business cases for autonomous and unmanned ships - Mr Ørnulf Jan Rødseth (SINTEF Ocean AS) (Marconi)
16:45	Launch and Recovery for Ship-Deployed Autonomous Underwater Vehicles - Prof. Karl Sammut (Flinders University) (Marconi)
17:00	3D Adaptive Coverage Planning for Confined Space Inspection Robots - Mr Rowan Pivetta (Flinders University) Prof. Karl Sammut (Flinders University) (Marconi)
17:15	Wetlands monitoring with innovative autonomous vehicles - Mr Angelo Odetti (CNR-ISSIA) (Marconi)
17:30	Fastening of the data transmission in high latency satellite networks - Mr Hubertus Osterwind (Idea Meets Market Beteiligungsgesellschaft mbH) Mr Robert Kratz (idea meets market Beteiligungsgesellschaft mbH) (Marconi)

13:00	--- Lunch ---
14:00	Workshop (until 18:00) (Marconi)
14:00	Workshop (until 18:00) (Oceania)
14:00	Workshop (until 18:00) (Vulcania 2)
14:30	Tour (until 19:00) ()

13:00	--- Lunch ---
14:00	Workshop (until 18:00) (Oceania)
14:00	Workshop (until 16:00) (Vulcania 2)
14:30	Hydrodynamics (until 16:30) (Marconi)
14:30	The use of modern computational tools in the design process of unconventional propellers for performance prediction and full-scale extrapolation - Dr Juan González-Adalid (SISTEMAR) (Marconi)
14:45	Fluid dynamics optimization of a shaft-less rim-driven thruster - Mr Daniele Bruno (MICAD s.r.l.) Mr Daniele Malgieri (MICAD s.r.l.) (Marconi)
15:00	Hydrodynamic noise from a propeller in open sea condition - Mrs Marta Cianferra (University of Trieste) (Marconi)
15:15	Numerical Predictions of a Model Scale Propeller in Uniform and Oblique Flow - Dr Mitja Morgut (Università degli Studi di Trieste) (Marconi)
15:30	EVALUATION OF PROPELER INDUCED VIBRATIONS - Dr Liviu Crudu (“Dunarea de Jos” University of Galati, Faculty of Naval Architecture and NASDIS Consulting, Galati) Dr Oana Marcu (“Dunarea de Jos” University of Galati, Faculty of Naval Architecture) (Marconi)
15:45	CFD Automated Self Propulsion Test - Mr Gianluca Gustin (FINCANTIERI) (Marconi)
16:00	DIFFUSER DESIGN WITH VISCOUS FLOW COMPUTATIONS FOR A LARGE WATER TUNNEL - Mr Cagatay Sabri Koksal (Istanbul Technical University) (Marconi) Slides
14:30	Interior Yacht Design (until 16:30) (Saturnia)
14:30	Interior Yacht Design: evolution and new scenarios - Mariateresa Campolongo (Università degli Studi di Genova) (Saturnia)
14:45	Interior design of motor yacht, evolution of style and typology - Dr Enrico Carassale (UNIGE DAD) (Saturnia)
15:00	Inclusive Yacht Design - Mr Paolo Ferrari (University of Trieste) (Saturnia)
15:15	An Italian Way for Yacht Coding? - Dr Leonida Giunta (Ca' Foscari University of Venice) (Saturnia)

Share this page

Direct link

Social networks

Calendaring